Ensure insulation materials conformity and access the entire European market

GET A QUOTE
DOWNLOAD PDF VERSION
Insulating materials are used in construction due to their properties to protect against heat or cold (thermal insulation), noise (acoustic insulation), fire (fire insulation) or water (water insulation). Sheets for waterproofing used as water insulation act as a moisture barrier, preventing water from entering or filtering through the various elements that make up a building, and like all other insulating materials, they are permanently added to the structures, directly influencing their quality and safety. Marketing of insulating materials in Europe is regulated by the Construction Products Regulation 305/2011.
Manufacturers or their representatives in the European Union are solely responsible for compliance of their products with the terms of the regulation, both for trade and use. When a manufacturer identifies its insulating material with the CE mark, this shows that the material complies with the harmonized standards and therefore fulfills the essential requirements of the regulation.
CE marking of insulating materials and waterproofing sheets is regulated by a 1, 2+ and 3 assessment system, according to the product and its end use. These assessment systems require the intervention of a notified body, either to perform the factory production control audit and/or to perform the type tests.
Solution
Applus+ is a Notified Body* for CE marking of insulating materials and sheets for waterproofing. We work with the manufacturers of these products throughout the entire CE marking process. The harmonized standards for CE marking of insulating materials and sheets for waterproofing are as follows:
 EN 13707 Flexible sheets for waterproofing: Reinforced bitumen sheets
 EN 13859-1  Flexible sheets for waterproofing: Underlays for discontinuous roofing
 EN 13859-2 Flexible sheets for waterproofing. Underlays for walls
 EN 13956 Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing
 EN 13967 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet
 EN 13969  Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets
 EN 13970 Flexible sheets for waterproofing. Bitumen water vapour control layers
 EN 13984 Flexible sheets for waterproofing. Plastic and rubber vapour control layers
 EN 13162 Thermal insulation products for buildings. Factory made mineral wool (MW) products
 EN 13163 Thermal insulation products for buildings. Factory made expanded polystyrene (EPS) products
 EN 13164 Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products
 EN 13165 Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products
 EN 13166 Thermal insulation products for buildings. Factory made phenolic foam (PF) products
 EN 13167 Thermal insulation products for buildings. Factory made cellular glass (CG) products
 EN 13168 Thermal insulation products for buildings. Factory made wood wool (WW) products
 EN 13169 Thermal insulation products for buildings. Factory made expanded perlite board (EPB) products
 EN 13170 Thermal insulation products for buildings. Factory made products of expanded cork (ICB)
 EN 13171 Thermal insulation products for buildings. Factory made wood fibre (WF) products
 EN 14063-1 Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate productsEN 13170 
 CE marking based on the assessment system and previously mentioned harmonized standards defines a series of tasks to be performed by the manufacturer and the Notified Body:
 Manufacturer responsibilities:
  • To perform type testing (airborne and impact noise transmission, fire resistance, thermal transmittance, durability, water absorption, etc.)
  • To implement Factory Production Control (FPC) in the company.
  • To draw up a program of follow-up tests, specifying types, frequencies, etc.
Responsibilities of the Notified Body, as applicable:
  • To perform type testing (when applicable)
  • To perform FPC Initial Inspection, assessment and acceptance       
  • To make the annual safety and assessment inspections
CE Marking documents:
  • Factory production control (FPC) certificate (NB)
  • Declaration of Performance (Manufacturer)
  • CE marking and labeling (Manufacturer)
Applus+ has over 100 years of experience performing inspections of construction projects. We carry out thousands of tests and certificates for construction products. 
* Applus+ is the commercial brand of LGAI Technological Center S.A., Notified Body nº 370.
Benefits
  • One single interlocutor for the completion of specification testing and the audit of factory production monitoring
  • Improved control over your product and process, thus reducing costs due to low quality.
  • Improved precision and homogeneity in the technical measurement values of your products clearly transmitted to your customers.
  • Market your product throughout the European Union
 
GET A QUOTE

Applus+ uses first-party and third-party cookies for analytical purposes and to show you personalized advertising based on a profile drawn up based on your browsing habits (eg. visited websites). Click HERE for more information. You can accept all cookies by pressing the "Accept" button or configure or reject their use by clicking here.

Cookie settings panel